IC-M802
The ICOM SSB transceiver deploying Digital Signal Processor
technology offers a high level of communications performance while at sea.
The ICOM M802 can be used for: -
- Distress and Safety communications with
coastguard
- Talking to other yachtsmen
- Shore communications via coast radio stations
- Sending and receiving of email - requires pactor
modem
- Receiving world-wide short-wave radio broadcasts
- Receiving global weather broadcasts
- Fax, RTTY, Navtex - requires PC and software
Built-in digital selective calling (DSC) For added
safety at sea, the IC-M802 offers the ability to make and receive the following
DSC calls via HF SSB radio :-
- Distress alert
- Urgency
- Safety
- Individual
- Group
- Test
The advantage of DSC via HF SSB is that calls can
be made over a far greater range than can be achieved using VHF DSC.
M802 Basic specification
- Wide band receive coverage (0.5 - 29.9999MHz)
- Transmit 1.6 - 29.9999MHz
- All ITU channels plus 160 user programmable
channels
- Transmit output power 150 watts
- Power supply requirement : 13.6 Volts
- Consumption 3 Amp Receive, 30 Amp Transmit
Automatic Antenna Tuner (ATU)
The
AT-140 easily connects to the IC-M802 and is used to tune the SSB antenna
(backstay or whip) to the transmit frequency. When the tuner cannot tune the
antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the
LCD.
M802 DIY package includes: -
- M802 transceiver
- AT-140 ATU
- 10 metre co-ax cable to go between M802 and ATU
- 10 metre remote tuning lead to go between M802 and
ATU ·
- 1.5 metre NMEA GPS lead
- All leads supplied with plugs connected
- Installation guide and instructions
- Telephone technical support
Tested and working, only extras required is
antennas and 12 volts power supply.
We can even demonstrate the system
working. |
ICOM M801 v
M802
Although the M801E and
M802 look the same that is where the difference finishes.
The
M801E is housed in a more robust housing with
heavy duty connectors, ideal for the marine environment.
By using the latest
DSP technology, the M801E has better receiver
performance.
The M801E is a fully complaint class 'E' DSC unit offering a
full range of DSC features compared with the M802 limited range of DSC
functions.
The M801E is CE approved where
the M802 is not. 
Click here for more
information
Click here for
pricing 
Click here for more information
Click
here for pricing |
